 |
Pivot axis always at point zero
Pivot axis is designed so that all cuts are at point zero on the table guide, for increased productivity and greater precision.
|
 |
Head in ripping position
The head pivots 90° left or right in the rip position and secures with a lock button.
|
 |
Tilting and pivoting head
The head tilts left 90° for dado cuts & pivots to both sides for precise miter cuts.
|
|
Model V-154
|
14” RADIAL ARM SAW
|
|
Heavy-duty, high-quality steel base for exceptional stability.
Large, high-density particle-board table with guide.
Precision-machined, high-quality steel column allows the radial arm support to slide effortlessly.
Radial arm and support are made of high quality, precision-machined, ribbed cast-iron.
Motor bracket slides on four ball bearings mounted on rods for greater precision and ease of movement.
Tempered steel locking handles.
Positive stops at 0º, 45º and 90º for tilt & pivot.
Powerful, capacitor equipped, industrial motor mounted on permanently lubricated, sealed industrial ball bearings.
Dust-proof magnetic switch with overload protection & ergonomic start button.
14” (356 mm) carbide tipped saw blade & key included.
Rod and blade protectors with anti-kickback fingers.
|
|
|
Blade diameter
|
14” (356 mm)
|
Arbor diameter
|
1” (25 mm)
|
Maximum depth of cut at 90°
|
4 5/8” (118 mm)
|
Maximum depth of cut at 45°
|
3 1/8” (79 mm)
|
Maximum distance, blade to table
|
2 3/4” (70 mm)
|
Maximum crosscut thickness
& width
|
4 5/8” x 25”
(118 x 635 mm)
|
Head tilt angle range
|
0° TO 90° (to left)
|
Maximum ripping capacity
|
31” (787 mm)
|
Maximum miter cut at 45º
|
17 1/2” (445 mm)
|
Miter capacity
|
60° to left, 45° to right
|
Dado blade capacity
|
1 3/4” (45 mm) maximum
|
Table size
|
1 1/8”x 28 1/2” x 41 1/2”
|
Motor speed
|
3450 RPM
|
Motor M2
|
3.5 CV, 230 V, 1 Ph, 17 A
|
Motor M3
|
5 CV, 230 V, 3 Ph, 16 A
|
Motor M4
|
5 CV, 208 V, 3 Ph, 16 A
|
Motor M5
|
5 CV, 600 V, 3 Ph, 5.6 A
|
Motor M6
|
5 CV, 440 V, 3 Ph
|
Weight
|
550 LBS (250 kg)
|
|
|
|
|
|
|
