Available on special order
DIGITAL READ-OUT
Programmable table setting
|
Model 15-080
|
37” WIDE BELT SANDER
|
|
Disk brake stops the machine instantly.
Safety limit switches will shut down the machine if the sanding belt runs off track.
Advanced pneumatic belt tracking system ensures trouble-free operation, and longer sanding belt life.
Ensures trouble-free operation and longer sanding belt life.
All machine controls are centralized on a frontmounted control panel.
Large, clearly identified buttons simplify set-up and start-up.
Belt tension is maintained by constant air pressure.
Large variable speed control knob adjusts feed speed while the sander is running.
Workpiece thickness indicated in both metric or imperial readout.
Digital readout and controller.
|
|
|
Maximum sanding width
|
37” (940 mm)
|
Maximum sanding height
|
5 13/16” (148 mm)
|
Minimum sanding length
|
10” (330 mm)
|
Contact roller diameter
|
4” (102 mm)
|
Sanding belt size
|
37” x 75” (940 x 1905 mm)
|
Sanding belt speed
|
2500 FPM
|
Maximum air requirement
|
5 kg/mm2
|
Conveyor motor
|
1 HP
|
Feed rate (variable)
|
14 - 60 FPM
|
Dust outlet diameter
|
5” (127 mm) x 3
|
Motor M2
|
20 HP, 220/440V, 3 Ph, 50.3/25 A
|
Motor M3
|
20 HP, 600 V, 3 PH, 18.4 A
|
Weight
|
2310 LBS (1050 kg)
|
|
|
|
|
|
|
