Available on special order
DIGITAL READ-OUT
Programmable table setting
|
Model 15-070
|
25” DOUBLE HEAD WIDE-BELT SANDER
|
|
Time saving double head design: sand through 2 grit levels (rough and finish) in a single pass.
Dynamically balanced rubber coated contact drum.
Heavy ground table is supported by four lead screws for greater stability.
Photo-electric belt tracking sensor with automatic disc brake shutdown if belt breaks or mistracks. Built-in emergency stop bar located above the in-feed for convenient access.
High quality durable rubber conveyor belt for long service life.
Large variable speed control knob adjusts feed speed while the sander is running.
Centralized, front-mounted control panel for easy access with large, clearly identified buttons to help simplify setup and operation.
Digital display and keypad controlled table height/sanding thickness.
CSA standard electronic switch and motors; independent dust protected electrical box.
|
|
|
Table size
|
26 1⁄4” x 56 1⁄2” (667 x 1435 mm)
|
Table height from floor (min/max)
|
32 1⁄2” TO 37 1⁄2” (826 TO 953 mm)
|
Minimum board length
|
14 3⁄8” (365 mm)
|
Maximum board width
|
24” (610 mm)
|
Maximum board thickness
|
5” (127 mm)
|
Sanding belt size
|
25” x 75” (635 x 1905 mm)
|
Feed speed (variable)
|
16.5 - 63 FPM (5 -19 M/MIN)
|
Air requirement
|
71 PSI
|
Contact drum surface speed
|
5314 FPM
|
Combinaison drum surface speed
|
3936 FPM
|
Contact drum diameter size
|
7 7⁄8” (200 mm)
|
Combination rubber drum size
|
5” (125 mm)
|
Motors - infeed M2
|
20 HP, 220 V, 3 Ph, 50.3 A
|
Motors - infeed M3
|
20 HP, 600 V, 3 Ph, 18 A
|
Motors - outfeed M2
|
15 HP, 220 V, 3 Ph, 38 A
|
Motors - outfeed M3
|
15 HP, 600 V, 3 Ph, 14 A
|
Motors - conveyor M2
|
2 HP, 220 V, 3 Ph, 6.7 A
|
Motors - conveyor M3
|
2 HP, 600 V, 3 Ph, 2.1 A
|
Motors - table elevation M2
|
1⁄4 HP, 200 V, 3Ph, 1 A
|
Motors - table elevation M3
|
1⁄4 HP, 600 V, 3Ph, 0.7 A
|
Overall dimensions
(lo. x la. x h)
|
74 3⁄8” x 50 7⁄32” x 76 3⁄8”
(1890 x 1270 x 1940 mm)
|
--- |
|
|
|
|
|
|
